Introduction
The engine in the vehicle starts when the starter turns the crankshaft. If the engine has a faulty starter, it cannot function properly; you need an expert to repair it. You can use a remanufactured, rebuilt, or repaired starter as an alternative to a new one for a cost-effective solution.
Although a repaired, rebuilt, or remanufactured starter will not be as good as the new one. However, it will still be as good as new, albeit with some pros and cons.
In this article, you will learn about repaired, rebuilt, and remanufactured starters, as well as their differences, pros, and cons of using them.
Repaired Starter
A starter consists of many parts that work together to crank the engine from a stop. If the engine is making an unusual sound, it means you need an expert to fix your starter.
- After diagnosing the faulty starter and replacing any worn or damaged parts, the starter is ready to use.
- Sometimes, the brusher, solenoid, or bearing becomes damaged during the process, producing a clicking sound that allows the driver to receive the indication.
- To repair the starter, it is essential to replace these parts so the starter operates smoothly.
Rebuilt Starter
The professionals can replace the worn-out parts to fix the faulty starter.
- For rebuilding a starter, the experts are using a less comprehensive method.
- A rebuilt starter typically provides 30,000 to 50,000 miles of service.
They are more reliable than a repaired starter. Because the old parts are still in place, the likelihood of failure increases.
- It is a cost-effective solution for the starter problem.
- A repaired starter typically lasts shorter, while a rebuilt one usually lasts longer.
Remanufactured Starter
A remanufactured starter is essentially the same as a new starter. The factory experts restore the starter according to the original factory specifications.
- In the initial step, the professionals disassemble the starter.
- The mileage a remanufactured starter provides is similar to that of a new one, around 100,000 to 150,000 miles or more.
- The most reliable, cost-effective solution for all the starter clicking and jamming engine problems.
- They clean every part and replace worn-out parts with remanufactured ones.
- In most cases, the factory professionals replace solenoids, brushes, and bearings with new or remanufactured ones.
Key Differences
| Features | Repaired starter | Rebuilt starters | Remanufactured starters |
| Definition | Minimal fix and replacing the worn-out parts | Workshop professionals replaced the worn-out parts | Factory restoration of the starter failed parts and thorough cleaning of the other parts. |
| Warranty | Short | Much longer than the repaired one | Usually longer |
| Cost | Lowest | Cost effective | An expensive process, but more cost-effective than a new one. |
| Reliability | Low | Variable | High |
| Risk | The problem is temporarily fixed, but the underlying issue remains. | Uncertain longevity | Quality varies by remanufacturing |
Pros and Cons
There are several advantages to using repaired, remanufactured, and rebuilt starters. Here are the pros and cons of using any of them.
Repaired Starter
Advantages
- It has the lowest initial cost.
- It is a quick fix for a single damaged part.
Disadvantages
- The repaired starter has the highest risk of failure.
- They have poor reliability.
Rebuilt Starter
Advantages
- It has more reliability than the repaired starter.
- It is an affordable option compared to a new or remanufactured one.
Disadvantages
- The reliability is lower than that of the remanufactured starter.
- The quality of the starter is compromised.
Remanufactured Starter
Advantages
- The remanufactured starter has the same warranty as the new one.
- These starters have the most excellent reliability.
- Factory professionals test the remanufactured starters before they are put into use.
Disadvantages
- The cost of manufacturing the starter is relatively high.
- There is a slight change in the quality of the starter.
Conclusion
You can decide whether to get a rebuilt, restructured, or remanufactured starter after considering the vehicle’s condition, budget, and reliability requirements.
- The most cost-effective and fastest option is a repaired starter, suitable for minor issues but with a limited lifespan.
- A rebuilt starter has new parts replaced, but the remaining parts may fail soon.
- A remanufactured starter offers affordability and dependability, as factory professionals replace worn-out parts while other components remain intact.
It offers more miles, an extended warranty, and improved durability. Although it is relatively expensive, it delivers stable operation and a longer service life, making it a good investment in a vehicle that requires reliable performance.
Essentially, remanufactured starters will fill the gap between affordability and quality, while rebuilt and repaired starters will meet the needs of those seeking cheaper or temporary solutions.
Why Choose a Starter Motor from Unitech Motor?
Unitech Motors provides starter and alternator parts of export quality. Because it has both OEM and aftermarket services. The company offers both original and remanufactured products that are environmentally friendly and cater to customers’ diverse needs. They do not compromise on quality and sustainability. Unitech starter motors, whether new or remanufactured, undergo thorough testing to verify durability, reliability, and consistent operation.